Dedicated to the memory of Glenn H. Curtiss, who in 1908 manned the first pre-announced public flight in America, the Glenn H. Curtiss Museum in Hammondsport, N.Y., is filled with hundreds of historical artifacts. Made of a variety of materials (wood, canvas, fabric, paint), those artifacts are subject to cracking, chipping, peeling, and distortion without the right amount of humidity — ideally, 40- to 60-percent relative humidity (RH). The museum, however, lacked a humidification system, and RH hovered between 3 and 10 percent.
Looking to maintain a RH level of at least 40 percent with minimal (±3 percent) fluctuation, Jim White, the museum's engineer, began a search for a humidification system.
“My first consideration was to find a system that could handle a large area, yet fit in the limited floor space I had available,” White said.
White explored several options, including an electric humidifier with disposable cylinders. But “I knew that would be … expensive to operate and maintain,” White said.
Brian Willamson of R.L. Kistler suggested a steam-to-steam humidification system. Such a system provides chemical-free steam to a space. Because boiler steam is the heat source, energy costs are low. There was just one problem: The museum did not have a boiler.
“We knew the steam-to-steam product would work for the museum,” Willamson said, “but in order to operate the system, they would have to invest in a boiler, and we just didn't want them to have to make that extra investment.”
Because the museum had natural gas as an energy source, Willamson told White about the DRI-STEEM GTS gas-to-steam humidifier. The GTS could provide chemical-free, low-cost humidification with the control the museum required and fit in the space allotted without additional equipment.
“What excited me most about the GTS was the fact that it was a direct-fired, stand-alone unit that could be provided with an area-type steam-distribution system designed to distribute steam in large spaces without ductwork,” White said. “And I was certainly excited about the lower energy costs we would incur by using natural gas instead of electricity.”
White added: “I thought we may need to add one more unit to humidify the 2,000-cfm continuous outdoor air supplied by our rooftop air conditioners, but we're up and running at ideal RH levels.”
Information and photograph courtesy of DRI-STEEM Corp.
For Design Solutions author guidelines, call Scott Arnold, executive editor, at 216-931-9980, or write to him at [email protected].