Latest from Piping / Pumping

HPAC Engineering

Proposed Standard on Preventing Legionellosis Open for Public Comment

Feb. 11, 2013
Changes clarifying requirements in proposed ASHRAE Standard 188P, Prevention of Legionellosis Associated With Building Water Systems, are open for a third public comment ending March 11.

Changes clarifying requirements in proposed ASHRAE Standard 188P, Prevention of Legionellosis Associated With Building Water Systems, are open for a third public comment ending March 11.

William McCoy, chair of the Standard 188P committee, said more than 150 comments were received during the previous review, in June 2011. Resulting changes include the:

• Clarification of definitions and the addition of a definition in Section 3, Definition of Terms.

• Reorganization of building characteristics into two subsections—subsections 5.2 and 5.3—for clarity in Section 5, Risk Characterization.

• Reorganization of Table 1, Determining Preventative Measures Required for Buildings, with two subsections of Section 5 (5.2 and 5.3) referenced.

• Creation of a new subsection—7.4, Water System Treatment and Management Program—in Section 7.

• Clarification of wording, references, cited regulations, and informative notes in Section 8.

Standard 188P also covers potable-water systems in buildings.

Standard 188P differs from ASHRAE Guideline 12, Minimizing the Risk of Legionellosis Associated With Building Water Systems, in that it specifies exactly what must be done to treat various building water systems, while the guideline merely gives recommendations.

For more information, including how to comment, visit www.ashrae.org/publicreviews.

About the Author

Scott Arnold | Executive Editor

Described by a colleague as "a cyborg ... requir(ing) virtually no sleep, no time off, and bland nourishment that can be consumed while at his desk" who was sent "back from the future not to terminate anyone, but with the prime directive 'to edit dry technical copy' in order to save the world at a later date," Scott Arnold joined the editorial staff of HPAC Engineering in 1999. Prior to that, he worked as an editor for daily newspapers and a specialty-publications company. He has a bachelor's degree in journalism from Kent State University.