| EGB Conference & Expo Sessions & Speakers Announced |
EGB 2009, now a component of HVACR Week, gets under way Thursday, Sept. 24, at 9:15 a.m. with the keynote event: Robin Crow’s “The Power of Service”, presented by Trane.
Following the keynote presentation, EGB offers the first of seven technical sessions designed to help attendees design greener, more energy-efficient mechanical systems that will save energy and money and reduce the carbon footprint of the buildings they design.
Learn about green engineering practices and impact from the industry’s leading engineering and buildings professionals – individuals with extensive green building knowledge and experience and immense passion that drives them to share their knowledge with others.
Sessions and speakers scheduled for this year’s EGB are:
"31 Tannery: The Nation’s First Net-Zero-Electric Commercial Building" by Edward H. Brzezowski, PE, LEED AP, Noveda Technologies
"High-Performance HVAC Retrofits: Achieving 40-TO-70 Percent Energy Savings" by Ben Erpelding, PE, CEM, Optimum Energy LLC
"Evaporative Cooling: The Greenest of HVAC Processes" by Mark S. Lentz, PE, Lentz Engineering Associates Inc.
"Busting The Myth That Green Costs More" by James D. Qualk and Paul McCown, PE, LEED AP, CEM, CxA, SSRCx, LLC
"The Role Of Controls In Commissioning Green Buildings" by Ron Wilkinson, PE, LEED AP, AKF, Group LLC
"The Greenhouse-Gas Impact of Various Chiller Technologies" by Gerald Williams, PE, LEED AP, McClare Engineering
"Commissioning:A Basic Ingredient For a High-Performance School" by Jim Seckel, PE, CxA, CBCP, LEED, AP, and Colleen Smith, PE, LEED AP, CxAP
Online Registration Now Open
Plan now to attend the sixth annual EGB Conference & Expo, now part of HVACR Week 2009. Your EGB Conference Pass entitles you to participate in all EGB activities as well HVACR Week events, including the HVACR Week Welcome Reception, Comfortech and the all-new Commercial HVACR Symposium.
For complete details and to register today, visit www.egbconference.com
| Recovery Act to Accelerate Deployment of Geothermal Heat Pumps |
|During a visit to Fort Wayne, Ind., where he toured a geothermal-heat-pump (GHP) manufacturing facility, U.S. Energy Secretary Steven Chu announced that nearly $50 million from the American Reinvestment and Recovery Act (ARRA) will help advance commercial deployment of the renewable heating and cooling systems, which use energy from below the Earth's surface to move heat into or away from a home or building. The expanded manufacturing and installation of GHP could aid in the creation of new jobs while reducing the use of fossil fuels. [MORE] |
| ASHRAE Operations and Performance Management Certification Available Worldwide |
|The American Society of Heating, Refrigerating and Air-Conditioning Engineer’s (ASHRAE’s) Operations and Performance Management Professional (OPMP) certification program has joined the Society’s two other existing certification offerings available at testing centers around the world. [MORE] |
| Emerson Acquires Vilter Manufacturing |
|Emerson Climate Technologies, a business of Emerson, has acquired Vilter Manufacturing LLC, a privately held compressor manufacturer based in Cudahy, Wis. Vilter compressors are used in a wide range of industrial refrigeration systems. Financial terms of the deal were not disclosed. [MORE] |
| Green Virtual Conference & Expo |
|Presented by American School & University magazine and sponsored by Johnson Controls, Green School & University is a free virtual conference and exposition that will be held online Wednesday, June 24, from 10:30 a.m. to 6 p.m. EST. [MORE] |
| ||June 10, 2009 |
| Regenerative Dual Duct: An Overview |
By MARK S. LENTZ, PE
|The energy crisis of the 1970s led industry experts and legislators to conclude that buildings needed more insulation, infiltration required additional control, and ventilation rates had to be reduced. This had the unintended consequence of depressing indoor-air quality (IAQ). By 1989, this was recognized as a major problem, and ANSI/ASHRAE Standard 62, Ventilation for Acceptable Indoor Air Quality, was updated and reissued. The most significant change to the standard involved the priority assigned to ventilation. Before Standard 62-1989's publication, ventilation could be based on occupancy at the system level, and a system could be designed to provide the larger of the minimum outdoor-air or makeup-air requirements to offset exhaust. [MORE] |
True GREEN Savings
EXHAUSTO's DCV systems offer true energy savings for clothes dryer, bathroom and kitchen exhaust system. Available and installed for decades real savings have been documented. Advantages include:
- Pay-back of less than 12 months and a huge Return on Investment.
- Big energy savings
- Saves valuable floor space
- Quick and easy to install.
- Perfect for renovation projects
- Ultra quiet operation
Contact us for cost and savings estimates – it's never too early to start saving.
For more information call (800) 255-2923 or visit us.exhausto.com.
MovinCool, the world's largest manufacturer of commercial spot air conditioners, offers a wide range of portable and ceiling mounted models, with capacities from 7,000 to 60,000 Btu/h. The units are used for emergency backup, supplemental and permanent cooling - perfect for data centers, office spaces, hospitals, schools, warehouses, manufacturing plants and outdoor events. MovinCool's portable models can be quickly wheeled into place whenever needed, with virtually no installation required. The company's latest compact, ceiling-mounted model allows easy installation in tight spaces, making it ideal for server and telecom closets. Plus now thru 5/31/09, get $100 with MovinCool’s Double-Play Promotion. For more information, visit the MovinCool web site at www.movincool.com.
|Orival filtration products are used on cooling systems worldwide. Orival offers individual automatic filters, manifolded multi-filters and skid mounted water treatment systems to removes organic and inorganic suspended solids from cooling water decreasing deposition on heat transfer surfaces, reducing sites for micro-organisms to colonize and preventing the clogging of nozzles, orifices and valve actuators. Call 800-567-9767 or send us an email at [email protected] or click here for more info. |
--Orival, Inc., Englewood, NJ 07631.
As today's building projects increase in complexity, communicating designs and design changes among mechanical, electrical, and plumbing (MEP) engineers and their extended teams, including architects and structural engineers, becomes more important. If you're a MEP designer or engineer, our webcast series featuring AutoCAD MEP and Revit MEP will help you improve productivity, accuracy, and coordination. Register now.
FanDrafter for Autodesk® Revit® 2009
Autodesk® Revit® families are available for every model and configuration of product from Loren Cook, one of the largest manufacturers of industrial and commercial fans and blowers in the world. Each 3D parametric family is a full-scale representation of the product and contains all sizes available for that model. Each family includes information on duct connection size, electrical connection location, mounting holes (where applicable) as well as user defined attributes for airflow, static pressure, RPM, horsepower, voltage, phase and more. Click here to access Loren Cook FanDrafter and library of Revit® files
| Contact information: Kate Hoban, HPAC Engineering |
Thank you for reading HPAC Engineering's FASTRACK e-newsletter.
You've received this e-newsletter for one of three reasons:
1) You signed up for it on the HPAC Engineering Website.
2) You received the HPAC Fastrack e-newsletter in the past.
3) You identified yourself as a reader of HPAC Engineering magazine.
Manage Your Subscription
To subscribe: Subscribe
To unsubscribe: Unsubscribe
To change your e-mail address:
Send an email to change, and include your old address, as well as your new address.
2009 Penton Media, Inc. All rights reserved.